Fisher&Paykel Dryer Repair

Tumble dryers are very gentle on the most delicate fabrics. Various drying programs allow you to cope with the drying of down jackets, jeans, woolen and cotton fabrics. But, like any technique, dryers are subject to wear and tear. Some breakdowns of equipment can lead to complete failure. In such cases, our Oceanside Appliance Service Center will help in resolving this issue. Our technicians provide quality Fisher&Paykel Dryer Repair in Oceanside, CA and service your home appliances.

Among the breakdowns of dryers, one can distinguish such as

Dryer won’t start

First of all, check whether there is voltage in the mains, whether the hatch door is hermetically closed, whether the plugs have been knocked out. Try restarting the dryer or plug it into a different outlet. If the failure is still not found, contact Fisher&Paykel Dryer Repair and Service for assistance.

Noise during drying

If your tumble dryer vibrates and makes a lot of noise when turned on, check if it is properly installed. After all, the device must be level, without distortions, so that the drum does not touch the internal mechanisms and can rotate freely. Destruction of the drive belt or bearings can also cause noise during operation of the machine. This problem will be fixed by the Fisher&Paykel Dryer Repair wizards.

Do not spin the drum in the dryer

The cause of the breakdown may be an overload of the drum with a large number of things. A malfunction in the electronic module can also lead to such a problem.

After drying things remain wet

The breakdown may be associated with the burnout of the heating element of the drum mechanism or with an overload of the drum, as a result of which the bearings and the engine of the machine break. These parts can be replaced by Fisher&Paykel Dryer Repair and Service.

Dryer is leaking

Check the drain valves, they may need to be cleaned. Also, the cause may be damaged gaskets or improper connection of the unit to the water supply. The correct connection will be made by Fisher&Paykel Dryer Repair.

The machine works but the drum does not spin

All things must be carefully loaded into the drum, otherwise tangled linen can disturb the centering of the mechanism and lead to uneven rotation of the drum, and then to the fact that the drum will not spin at all. Another common cause of such a breakdown is the failure of the electronic module or software failures. This problem will require a Fisher&Paykel Dryer Repair and Service to do the job.

The dryer gets very hot

The reason for the strong overheating of the dryer may be a partial short circuit of its heating element, a dirty vent, or damage to the impeller. The heating element will be replaced by the masters of our Fisher&Paykel Dryer Repair service center.

Reasons for malfunctioning dryers

• Depressurization of the exhaust duct.
• This is easy to determine, since in the room where the machine is standing there will be high humidity.
• Drum overload.
• Perhaps one of the most popular causes of dryer damage. Do not load more items than the maximum allowable load weight. Especially too wet things, because the power of the drum is not designed for such drying. As a result, the main components of the unit break down.
• Confusing things.
• Uneven distribution of laundry inside the drum can cause excessive noise and vibration during operation, as well as wear of the rollers.
• Dirty machine filters.
• Insufficient air circulation, due to which the machine overheats, and things do not dry completely.

Independent intervention in the dryer or the actions of an unprofessional master can lead to undesirable consequences for both the machine itself and the person. 

Therefore, call the qualified Oceanside Appliance Service Center engineers who provide free advice on any issues related to the operation of household appliances and tell you what needs to be done to prevent the recurrence of breakdowns in the future. Our Fisher&Paykel Dryer Repair and Service technicians are highly experienced, and repair all makes and models of dryers.