Amana Range Repair
A gas range is a very important part of any house or apartment. The fast heating used in the combustion of gas gives it an advantage over electric ranges. But like any technique, gas range can fail. You can find a master for gas range repair by contacting Oceanside Appliance Service Center. Our company employs professional technicians. We provide quality gas range repair Amana Range Repair in Oceanside, CA. Our company provides quality repairs for your appliances.
Our company has been in the appliance repair business since 2001. We have a staff of professionals with over 20 years of experience. We provide a one-year warranty on all replacement parts.
The main breakdowns in gas ranges
The gas burner of the range does not ignite or turn off
A common gas range malfunction is the gas burner not turning on or not turning off at all. This breakdown will be repaired by our Amana Range Repair and Service technicians.
The range gas burner goes out during operation
If your range’s gas burner goes out during operation, it’s a good idea to watch the gas burn. The flame from the burner should wash over the thermocouple from all sides. If the flame does not reach the thermocouple, the burner nozzle should be cleaned – otherwise the gas supply will need to be adjusted. Amana Range Repair technicians will perform the service.
Electric ignition doesn’t work doesn’t click, no spark
This breakdown is not the verdict of the panel, most owners switch to matches. The cause is: no voltage in the network, burned out spark generation unit (ignition unit), oxidized contacts of the power buttons. Amana Range Repair and Service specialists will solve this problem, when you contact us.
The burner may not turn on if the gas burner is burning weakly
If the flame on the gas burner burns sluggishly (has a small crown), the cause of the problem may be a clogged gas atomizer orifice. The burner should be spotless. The height of the flame depends directly on the amount of fuel and air supplied to the burner. Adjusting the air damper and cleaning the nozzle can correct the problem, but this work should be done by a specialized Amana Range Repair technician.
Range burners don’t burn properly
If the flame on a gas burner burns dimmer than normal (has a small crown), the cause of the problem may be a clogged gas atomizer orifice. The burner should be spotless. The height of the flame depends directly on the amount of fuel and air supplied to the burner. Adjusting the air damper and cleaning the nozzle may correct the problem, but this work should be performed by a specialized Amana Range Repair and Service technician.
The gas control valves are difficult to turn
This is mostly due to grease buildup on the turning mechanisms (adjustment knob and plastic rings). Remove everything and wash with soapy water. To a lesser extent due to lack of grease inside the faucet. It is necessary to disassemble the faulty faucet, clean out the old graphite grease and apply a new one. This work will be performed by our Amana Range Repair technicians. Do not overdo the amount of grease, or over time the valve holes will become clogged with excess grease.
The burner shuts off when the knob is released
Modern imported gas stoves are constantly “suffering” due to poor operation of the gas control system. Often, the thermo-electromagnetic valve breaks down. We recommend not to try to repair it and even more so, disconnecting it, the right solution is to replace the worn-out valve.
Gas ranges, if you provide them with timely service, will last a long time. Have your appliance serviced by a trusted Oceanside Appliance Service Center company. Many of the problems can be fixed by Amana Range Repair and Service professionals, but there are times when the unit is completely unusable if customers don’t call in time to fix the problems.
Result of decisions made
Our specialist carries out repairs, works carefully in the process, so as not to leave behind any traces of equipment repairs, and not to spoil the appearance. After the repair is completed, our company will back it up with a 90-day labor warranty. If you encounter the same problem during the warranty period, rest assured we will return to get an appliance back up to perfectly working condition.