Avanti Wine Cooler Repair

Wine cooler-refrigerators for storing wine and other drinks are widely used today. But if it fails, then you should immediately contact the professionals at the Oceanside Appliance Service Center. To preserve the wine, an urgent Avanti Wine Cooler Repair in Oceanside, CA is required. We have been doing this type of service perfectly for more than 20 years.

The main causes of breakdowns in cooler

Breakage, as such, can occur in any technique, regardless of the manufacturer and brand. The most common factors leading to Avanti Wine Cooler Repair and Service, are the following:

• Incorrect operation. The equipment itself should stand on a flat surface, away from walls and heat sources. It should not be used at low/high outside temperatures, either.

• Power surges in the network. Modern technology is very sensitive to this and can simply burn out. If you want to protect yourself from Avanti Wine Cooler Repair, install a voltage stabilizer in your home or business.

• Natural aging and wear of parts. At the same time, it does not matter how new or high-quality they are – the intensity of the load on them is important.

As the master’s note, it is periodically worthwhile to carry out maintenance and diagnostics on equipment. This will allow early detection of the problem and timely Avanti Wine Cooler Repair and Service.

The most frequent malfunctions

Control module failure

How correctly it works will depend on the operation of the entire wine cooler. And due to power surges, it can burn out. Just connect the voltage stabilizer in your room. It is this detail that will indicate a breakdown:

The electronic scoreboard goes out – this can be not only the absence of electricians in the network, but also a breakdown of one or another sensor.

• The equipment fails to work, and the proper temperature set during the setup and operation is not set.
• An error code appears on the display.

In some cases, our Avanti Wine Cooler Repair wizards simply reflash it. And in case of a serious breakdown, the control module is completely changed.

Temperature sensor failure

In this case, the set temperature will not be kept in the cooler. A broken sensor can send incorrect high or low temperature data to the control board. But in reality, it will correspond to the given parameters. The only way to solve the problem is to replace the broken sensor. Our Avanti Wine Cooler Repair and Service technicians use only original replacement parts in their work.

Humidity sensor failure

Such a breakdown is indicated by fogging of the viewing window, as well as an increase in the level of humidity in the chambers. A power surge in the network can provoke its breakdown. But also, the movement of the unit, since the sensor itself is sensitive to any vibrations. In this case, the sensor is simply changed as soon as possible, so that the product does not deteriorate.

Violation of the integrity of the cooler tightness

Due to a violation of the tightness of the cooler, an error will be displayed on the electronic display about a failure in the operation of the compressor. And in order to restore the tightness, Avanti Wine Cooler Repair masters simply change the rubber band on the chamber door. And this is enough.

Fuse failure

If your equipment shows no signs of work or life, and there is electricity in the network, then the cause of the breakdown should be a blown fuse.

If your equipment is out of order, replacing and repairing a wine cooler on your own is not very difficult, and sometimes it is unrealistic. Such work requires special knowledge and details, tools, and original spare parts. That is why it is so important to call the master at the Oceanside Appliance Service Center in a timely manner. Trust Avanti Wine Cooler Repair and Service to an experienced specialist. After the repair, the specialist will check the reliability of his work, issue a warranty card, and document the work performed.