Sharp Microwave Repair

The microwave is one of the main devices of any kitchen. Careless or prolonged use of the microwave oven can lead to its failure. It is not necessary to replace the equipment when it breaks down. In most cases, you can restore the full functionality of the equipment by repairing it at the Oceanside Appliance Service Center. Masters of our service are ready to carry out high-quality and fast Sharp Microwave Repair in Oceanside, CA.  

We declare firmly – do not rush to throw out the assistant! But, in no case, do not repair it yourself – THIS IS DANGEROUS!!! For this, there are qualified specialists. Trust them with the complex Sharp Microwave Repair and Service process.

Typical malfunctions of microwave 

• The touchpad does not work. Damage to the touch control buttons usually occurs due to careless operation of the device. Pressing hard on the control panel, getting it wet, and other physical impacts can damage the device. Also, the cause of the malfunction may lie in a power surge and, as a result, the burning of contacts. The Sharp Microwave Repair specialists of our service center will be able to replace the released parts.

• Doesn’t heat up. If the microwave oven turns on, works, but does not

warms up food, it is most likely time to change the magnetron. Its breakdown could be caused by natural wear and tear, the presence of metal objects in the chamber during heating of food. Less commonly, the problem is due to low mains voltage. It will not be difficult for our masters to understand the cause of the breakdown and carry out the necessary Sharp Microwave Repair and Service.

• Does not turn on. A complete failure of the microwave to turn on is a direct sign of a broken fuse, door microswitch or board transformer. In this case, Sharp Microwave Repair means the replacement of a failed part.

• Grill not working. Grill failure can occur for two reasons: a natural failure of the system or damage to the control module. The exact problem is determined, as well as the method of its elimination at the diagnostic stage.

• Doesn’t respond to the power button. A complete failure of the mechanical control buttons in operation may be due to oxidation of the contacts, breakage of the processor board, or elementary clogging of the connectors.

• The display is dim. A dimmed microwave display is most often a sign of phosphor burn-in. In this case, Sharp Microwave Repair and Service means lamp replacement.

• Turns on and chirps. A crackle that is atypical for microwaves can be caused by two reasons. The first is incorrect operation (heating food in a metal dish), the second is a malfunction of the device (failure of the mica plate, burnout of the cooler and other problems).

• Jammed the door. Such a problem can occur for various reasons: breakage of the opening button spring, damage to the door hook, breakage of the latch. Only a workshop specialist will be able to accurately determine the location of the breakdown.

• It turns on, spins, but does not heat up. Most often, such a breakdown occurs due to the natural failure of the magnetron or fuse. Or for simpler reasons: low voltage in the network, circuit overload, incorrect mode. Usually, to solve the problem, it is enough to use an uninterruptible power supply.

• The start button doesn’t work. The breakage of the start button occurs due to its mechanical damage. To fix the problem, you need to install a new spare part.

• The board lights up but does not respond to button presses. The failure of the control unit can be caused by a break in the tracks of the membrane keyboard, sticking or gluing of contacts, or destruction of the cable. An experienced Sharp Microwave Repair specialist will be able to accurately determine the cause of the breakdown and eliminate it.

• The door doesn’t close. The locking of the door during operation of the device is provided by a bolt. It is his breakage that does not allow the door to close tightly.

• The plate does not rotate. The most common cause of such a malfunction is the failure of the gearbox gear. Much less often, a breakdown occurs due to the natural failure of the dish motor.

Call us right now and the Oceanside Appliance Service Center manager will answer all your questions. Or apply for our Sharp Microwave Repair and Service specialist to come to your home. For all services, one day is enough for us. Diagnostics and troubleshooting is our profile and we will bring it to the perfect level.