Speed Queen Washer Repair

Speed Queen washers are built to last, but even the most reliable units are subject to wear and tear. Oceanside Appliance Service Center in-home appliance repair service can help fix the breakdown or malfunction you’re experiencing. Since 2001, our staff of professional technicians has been providing quality and prompt Speed Queen Washer Repair in Oceanside, CA.

We have been in the appliance repair and service industry for over 20 years. We have become the best in the field, and we are the customers’ choice when trusting Speed Queen Washer Repair and Service.

Why customers choose our service center

• Free of charge to a qualified master.
• Diagnostics and troubleshooting.
• Professional Speed Queen Washer Repair and other home appliances.
• Check for performance and identification of defects.
• Quality repair with the use of branded components.
• Free consultation on the rules of operation.
• Issuance of warranty card.
• Affordable price for all types of our services.

What most often breaks in washers of this brand

Washer does not turn on

Before calling the master, it is worth making sure that the plug of the power cord of the washer is inserted into the socket, there is electricity in the house, and the toggle switch in the brush of automatic machines is turned on. It is worth checking the serviceability of the socket or extension cord, look for damage to the power cord. 

Worse, if the problem is still in the technician – there may be a faulty surge protector, wiring, control board, or a problem with its firmware. Our Speed Queen Washer Repair and Service technician will diagnose the problem and find out what the cause is.

Washer does not lock the door

Check if the door is closed tightly and if the items in the drum are not preventing the door from closing. The door hook, lock, motor, or control board may be faulty. 

The washer does not fill with water

Check whether the door is closed in the washer, after the start of washing, there should be a characteristic click of the hatch locking and start humming the valves. If this is the case, check if there is water in the house and if the tap to the washer is open. Realize that the problem is with the appliance itself, call a professional to perform Speed Queen Washer Repair. There may be faults with the hatch lock, fill valves, wiring, motor, and control board.

Washer does not spin the drum

In fact, the reasons can be several. To begin with, you need to make sure that the door is locked, the water supply to the machine is turned off, and in general, the drum rotates by hand or not. If the drum is not jammed from sticking to the rubber or jammed bearings, there may be many reasons. 

Possible malfunctions of the lock, valves, lost or torn belt, brushes or motor winding, problems with the pulley, tank or motor bearings, wiring, or failed control board. It is up to a technician who understands Speed Queen Washer Repair and Service to make an accurate diagnosis and repair.

Washer does not heat water

The most common cause of water not heating is self-draining. This is the process by which the water, when filled into the tank, immediately flows through the drain hose into the sewer, and thus does not reach the level of “Full Tank”. The machine may frequently pour water in portions when self-draining. Whether the wash mode with temperature is switched on. Possible faults: self-drain, valves, TEN, pressostat (water level sensor), wiring, control board failure.

The washer does not drain water

There are several reasons for stopping the washing machine: washing mode without draining water (delicate fabrics), the drain filter is clogged, the sewer system is clogged, or the hose is squeezed. Possible malfunctions: clog in the machine or clogged sewerage, faulty pump (pump), pressostat does not see the real water level, problems in the motor, wiring, control board is out of order. It is important not to delay Speed Queen Washer Repair in this situation.

The washer does not spin

Do not rush to call a technician until you check the drain filter for clogging. Check whether water is coming out of the tank or not. If there is still no water, the belt may have come off due to overloading, and at this point the brushes on the motor have been “wiped out”. Possible malfunctions: does not drain the water because of the pump or clog, torn or torn belt, brushes or the motor itself, control board, wear bearings.

Trust your appliance repair to the experts at Oceanside Appliance Service Center. Our technicians won’t take long to get back to you, and Speed Queen Washer Repair and Service is only a day away. After the repair, the specialist will check the reliability of its work, issue a warranty card and a certificate of completed work.