Modern household appliances are equipped with all kinds of electronics, thanks to which manual labor is automated, and the washing machine is not an exception. It performs the programmed actions during the washing process, but no one is protected from breakdowns. Sometimes the machine simply stops in the middle of the cycle, not completing the program to the end. Let’s consider the main reasons why the washing machine stops during the washing process.
Heating element malfunction
If the washing machine stops at the beginning of the washing process, it may be a breakdown of the heating element or burnout of the wires supplying power to it. Such a breakdown causes problems with water heating, the whole algorithm of the given actions is violated.
Clogged drain system
If the washing machine has stopped during spinning, it may be due to a clogged filter or drainage tube going to the drain pump. In this case it is necessary to check:
- Drain hose;
- Drain pump;
- Filter;
- Drain hole in the tank;
- The sewage system.
Washing Machine Maintenance Tip
The easiest way out is to check the drain filter, if it is clogged, you need to clean it and the entire structure of foreign matter or replace it with a new one. The whole operation will take you no more than 10-15 minutes.
North Country Appliance Repair Company experts
It is worse if the drain pipe or the entire home system is clogged. It is necessary to call a service center and diagnose the problem. You can still clean the drain with baking soda and vinegar, but you can’t manage the entire system without a special knowledge.
In case your washer stopped at the rinse cycle, the drain hose can be cleaned with your own hands. You should unscrew the clamps to disconnect the hose from the machine and the siphon of the dishwasher or sink, depending on whether the machine is in the kitchen or the bathroom. Then rinse it from the inside with hot water at a pressure. If this does not work, carefully remove the clog using a wire.
If your machine stops during a wash cycle due to a clog elsewhere, it’s best to call North Country Appliance Repair Company. Our trained and certified technicians will diagnose the problem in a timely manner and fix it. Without certain skills, it’s best not to take any risks.
Broken door of the hatch
If the washing machine has stopped working, the reason may be a loose closing of the door, which is due to a broken lock or loose fit of the rubber cuff.
Malfunction of important parts leads to the fact that the appliances can stop in any washing mode, and the electronic display shows an inscription indicating that the upcoming repair will cause serious harm to your budget. In conclusion, we would like to warn you: there are many reasons why the washing machine suddenly stops during the washing, and only a certified service center specialist can establish the correct diagnosis. North Country Appliance Repair Company is proud of our specialists` friendliness and professionalism are the main reasons of our success. you might just trust us: you will not find a better Washer Repair in San Diego County. We offer reasonable prices, an excellent quality of work and guarantee for all kinds of work that we perform.
Contact us:
