The first turning on the refrigerator is the moment on which the further operation of the technique depends. We have prepared answers to the question of how to carry such a unit properly, and how much you can turn on the refrigerator after transportation.
Is it possible to turn on the refrigerator immediately after transportation?
A common buyer’s error is to turn on the refrigerator immediately after buying.
Experts recommend that you not start immediately after transportation to maintain its functionality. The reasons why you cannot turn it on immediately: sharp temperature changes between the street and the premises, the type of transportation, and the presence of packaging.
How much time should it take after the delivery of the refrigerator??
When it is possible to turn on the refrigerator after transportation depends on the following factors:
- If the unit is transported in a horizontal position, you should wait 6 to 8 hours;
- if vertical delivery-in is the warm season 2-4 hours of waiting and in winter 4-8;
Transportation should be in a vertical position, but if overall sizes – it is possible in a horizontal position. The angle of inclination is allowed to be forty degrees. Before buying a refrigerator, specify the conditions of transportation. If the delivery circumstances are unknown and you do not know what time you can turn on the refrigerator after transportation, it is better to wait up to eighteen hours.
The factors presented are due to the need to normalize the temperature so that the circulation of the freon does not get machine oil from the compressor engine to avoid short circuits.
The first turning on the refrigerator after transportation is a guarantee of long-term operation.
Step-by-step instructions for connecting a new refrigerator
Instructions for the correct connection of the refrigerator, steps:
Check the housing of the unit. Make sure there are no damage and defects.
Prepare a place of installation. The socket should be near the refrigerator. It is impossible to switch on the refrigerator through the extension cord.
The housing should be placed 15 cm from the wall.
In the process of unpacking the refrigerator should be in a horizontal or vertical position. To adjust the refrigerator, you need to twist the legs.
Check the correctness of the guidelines.
Turn on the cord in the network, and check the efficiency.
Is it possible to turn on an empty refrigerator??
Before operating the refrigerator, it is necessary to turn on the empty position for stabilization, as well as the temperature for 2-3 hours, then the unit does not require this procedure. An exception is when it is still possible to leave the unit empty – defrosting, which is carried out at complete shutdown from electricity, should be carried out once every 3 or 4 months. This procedure does not apply to the refrigerator with NO Frost.
When to fill the products with a new refrigerator
It must be released from packaging paper. Then-wipe the shelves and boxes, without the use of any detergents. If you feel a strong smell from the factory, you can add vinegar to the water. Then turn the refrigerator in the ground socket. Adjust the temperature in the cameras.
The refrigerator should stand for another 2-3 hours at the first turn, and then you can fill it with products. Filling with food should not reach more than 50%, avoid hot dishes, as well as overall utensils.
Why does the refrigerator not work after transportation?
In most cases, just purchased refrigerator will not work under the conditions:
– non -compliance with the rules of transportation (angle of inclination, speed, and quality of the road);
– sloppy unpacking;
– lack of inspection of the refrigerator upon receipt;
– lack of knowing how much it is impossible to turn on the refrigerator after transportation;
– Turn on the moment after purchase;
– lack of settled temperature;
– Improper setting. It is necessary to install the refrigerator with a slight tilt back so that the door is easy to close and place it away from direct sunlight. The kitchen plate should be at least 50 cm;
– overloading the number of products. The filling should increase gradually.
If you have complied with all the conditions, but the refrigerator is noisy after the first switching on or does not turn on – turn off the energy supply for several hours. Check the installation, the compressor mount, the start-up relay, and the capacitor, the amount of refrigerant may be higher than normal. If no breakdown is found, consult a specialist.
Buying and installing a refrigerator is an important procedure on which further work depends. Therefore, it is important to know when you can turn on a new refrigerator. To avoid unpleasant situations, read the manufacturer’s instructions before use.
Do you want the best Refrigerator Repair in San Diego County? Call us! We are a leading service provider thanks to the excellent quality of work, that our specialists provide. We use only high-quality parts, recommended by the refrigerator producer. Forget about any discomfort, with our friendly and professional team. With us, you get the highest quality service and the friendliest approach. Our highly qualified workers will do all to make you forget about any issues with your refrigerator. Now, those are our issues.