The main error codes in washing machines Electrolux

HomeBlogThe main error codes in washing machines Electrolux
21DecNCR 1 3

Е31
Pressure sensor failure

Causes of the error:
The sensor frequency exceeds the permissible limit, wiring breakage.

Е32

The control board does not receive a signal about filling the washing machine tank

Causes of the error:
Broken pressure sensor. No water supply from the water supply system, faulty water level sensor.

Е33
Inconsistency of operation of water level sensors (sensor of protection of heating element against switching on the latter without water and sensor of the first level)

Causes of the error:
There is an inconsistency in the data supply between the water level sensor and the heater protection relay. The mains voltage may be too high.

Е34
The error in pressure sensor operation

Causes of the error:
Faulty connecting wires or pressure sensor.

Е35
The high water level in the tank

Causes of the error:
There is a failure or breakdown of the water level sensor.

E36 and E3A
There are problems in the operation of the protective relay of the heating element.

Causes of the error:
The relay preventing the heating element from switching on without water has failed.

Е37
Faulty first water level sensor (L1 S) Faulty sensor or connecting wires.The defective sensor of the first water level (L1 S)

Causes of the error:
The sensor or connecting wires are defective.

Е38
No signal from the pressostat

Causes of the error:
There may be a clog in the measuring tube of the sensor.

Е39
Defective overflow level sensor (HV1 S)

Causes of the error:
There are problems in the operation of the sensor element or it is out of order.

E5A
Radiator overheating in the central controller

Causes of the error:
The load on one of the controller elements is increased.

E5B
Bus voltage decreased to 175 W

Causes of the error:
A fault has occurred in the central controller. Check the connecting wires.

E5C
The DC voltage has increased to 430 W.

Causes of the error:
Faulty central controller.

E5D and E5E or E5F
FCV operation error

Causes of the error:
Defective wiring or elements of the central controller.

Want the best washing machine repair in San Diego County?

Call us!!! We are a leading service provider due to the excellent quality of work performed by our experts. We use only quality parts recommended by the washing machine manufacturer. Forget about any discomfort with our friendly and professional team. With us, you get the highest quality service and the friendliest approach. Our highly qualified staff will do everything to make you forget about any problems with your washing machines. Now it is our problem.

Contact us

(442) 291-2244

[email protected]

Tags:
License No. #50212
Our specialist will perform the necessary repairs right in your home. We are pleased to offer a 90-day labor warranty to all customers after we repair an appliance.
Newsletter
Subscribe to our news, you will receive personalized discounts
License No. #50212
Our specialist will perform the necessary repairs right in your home. We are pleased to offer a 90-day labor warranty to all customers after we repair an appliance.
Newsletter
Subscribe to our news, you will receive personalized discounts
©2024 Oceanside Appliance Service Center. All Rights Reserved.
Scroll to top